← All energy systems

Energy technology profile

Conventional nuclear fission

Conventional fission is the commercial reference for nuclear heat and electricity. It provides a baseline against which advanced reactor claims can be compared.

  • baseline
  • U-235
  • thermal cycle

Technical deep dive

How it works

A fissile nucleus absorbs a neutron and splits, releasing energy, fission products, and additional neutrons that sustain a controlled chain reaction. In a light-water reactor, ordinary water moderates neutrons and carries heat from solid uranium fuel to a steam cycle. Control systems, engineered cooling, containment, and operating procedures keep reactivity and decay heat within managed limits.

Chain reaction and reactor control

When uranium-235 absorbs a neutron, the compound nucleus can split into two fission fragments, prompt neutrons, gamma rays, and roughly 200 MeV of recoverable energy. Most energy begins as kinetic energy of charged fragments and becomes heat within the ceramic fuel. Some neutrons are born seconds later from fission-product decay; this delayed fraction is small but makes engineered control on human and mechanical timescales possible.

In a thermal reactor, water slows neutrons through elastic scattering and also absorbs some of them. Control rods, soluble boron in many pressurized-water reactors, fuel temperature, moderator temperature, and fission-product poisons all influence reactivity. Critical means each generation produces one continuing generation on average—not that power is uncontrolled.

Heat-to-electricity system

Fuel pellets sit inside sealed cladding tubes assembled into bundles. Coolant removes fission heat from the core. A pressurized-water reactor transfers that heat through steam generators to a separate steam loop; a boiling-water reactor makes steam in the vessel. A turbine turns a generator, a condenser rejects unused heat, and feedwater returns to the cycle.

Gross generator output includes electricity used by reactor coolant pumps, feedwater systems, cooling towers, safety equipment, and the rest of the station. Net output subtracts those loads. Thermal efficiency is constrained by steam temperature and the heat sink, while annual energy also depends on refuelling outages, maintenance, grid dispatch, and unplanned shutdowns.

Shutdown heat, barriers, and fuel cycle

Inserting shutdown rods stops the self-sustaining chain reaction, but radioactive fission products continue to decay and generate heat. Multiple cooling paths, electrical supplies, water inventories, procedures, and containment protect the fuel while decay heat falls. Defence in depth uses the fuel matrix, cladding, pressure boundary, and containment as successive barriers.

Mining, conversion, enrichment, fabrication, irradiation, interim storage, transport, and disposal form the fuel cycle. Used fuel contains fission products, remaining uranium, and newly created actinides. Countries choose direct disposal or differing degrees of reprocessing; either pathway requires safeguards and long-lived waste isolation.

Reason to use it

What could make it valuable

Existing plants provide continuous large-scale low-carbon power and a real operating baseline for judging every advanced nuclear alternative.

Unresolved engineering

What still blocks it

New projects must manage construction duration, financing, regulation, supply chains, used fuel, public acceptance, and long-term operating economics.

Its operating fleet supplies real cost, capacity, safety, fuel-cycle, construction, and waste data that frontier designs must improve upon or complement.

Monthly evidence layer

Research watch

Named programs, dated developments, and primary or official sources. Company claims are identified separately from independent or peer-reviewed evidence.

Last reviewed 6 September 2026

Research groups & programs

Current developments

  1. Present baseline

    Existing plants are the comparison control for advanced reactors

    Their measured availability, staffing, maintenance, fuel use, waste, upgrades, and operating cost are more informative than a generic 'commercial' label.

  2. Active frontier

    Life extension and flexible products broaden the research agenda

    Materials ageing, accident-tolerant fuel, uprates, digital controls, flexible generation, hydrogen, and process heat remain active technical programs.

Papers & official resources