Energy technology profile
Magnetic confinement fusion
Magnetic confinement fusion uses shaped magnetic fields to keep a hot plasma away from material walls. Tokamaks and stellarators are its principal configurations.
Technical deep dive
How it works
Superconducting coils create nested magnetic surfaces that guide charged particles around a toroidal chamber. External heating brings the plasma to fusion conditions, and in a burning D–T plasma the resulting alpha particles must provide much of the continuing heat. Magnets, plasma control, exhaust systems, neutron-resistant structures, heat extraction, and a tritium-breeding blanket must ultimately operate as one maintainable plant.
Magnetic surfaces and confinement
Charged particles spiral around magnetic field lines but stream rapidly along them. A torus closes the field path, while a helical twist prevents particles on the outside—where the field is weaker—from drifting away. Tokamaks obtain much of that twist from a large current driven through the plasma; stellarators generate it with three-dimensional external coils and can avoid a transformer-driven plasma current.
Collisions and turbulence still move heat and particles across magnetic surfaces. Confinement quality is summarized by energy-confinement time, while fusion performance depends on density, ion temperature, and confinement together—the Lawson triple product. Increasing density or pressure is limited by stability, radiation, impurity accumulation, and heat exhaust rather than by magnets alone.
Heating, burn, and control
Ohmic current, neutral-beam injection, radio-frequency waves, and microwaves heat the plasma and shape its current profile. D–T reactions produce alpha particles that should remain confined and self-heat the plasma. Plasma Q is fusion power divided by externally injected plasma-heating power. In a burning plasma, alpha heating dominates the heat balance; in an electricity plant, the stricter engineering Q also includes magnets, cryogenics, pumps, current drive, and other recirculating loads.
Tokamak disruptions can rapidly convert stored plasma energy and current into wall loads and runaway electrons. Active coils, gas or pellet injection, real-time diagnostics, and operating scenarios try to avoid or mitigate them. Stellarators reduce disruption risk and support steady state but require extremely accurate complex coils and careful optimization of trapped-particle transport.
The nuclear plant around the plasma
Fourteen-MeV neutrons pass through the first wall and deposit energy in a blanket. Lithium reactions must breed tritium at a rate that covers radioactive decay, processing inventory, leakage, and plant consumption. The blanket must also remove heat, multiply neutrons if needed, provide shielding, and release tritium for extraction—functions that compete for volume and materials.
The divertor handles concentrated exhaust particles and heat; tungsten and low-activation steels face thermal cycling, transmutation, swelling, and embrittlement. Remote maintenance must replace activated components while preserving plant availability. A plasma pulse is therefore only one subsystem in the path to useful electricity.
Reason to use it
What could make it valuable
A magnetically confined plasma can in principle produce a continuing heat source with very high fuel energy density and no fission chain reaction.
Unresolved engineering
What still blocks it
A plant must simultaneously sustain the plasma, exhaust heat, survive fast neutrons, maintain superconducting magnets, breed tritium, and remain serviceable.
It has the largest integrated fusion programs and a deep experimental base, but steady operation, materials lifetime, fuel self-sufficiency, and plant cost remain open.
Monthly evidence layer
Research watch
Named programs, dated developments, and primary or official sources. Company claims are identified separately from independent or peer-reviewed evidence.
Last reviewed 6 September 2026
Research groups & programs
- ITER Organization
Integrated burning-plasma tokamak, superconducting magnets, heating, diagnostics, blankets, and remote maintenance.
- EUROfusion
JET legacy, European tokamaks and stellarators, materials, tritium, and DEMO studies.
Current developments
ITER program
The central integration test is still aheadITER is designed to test alpha-dominated plasma physics and reactor-scale systems, not electricity production.
Plant frontier
Blanket and exhaust performance now sit beside plasma gainTritium self-sufficiency, high-heat-flux exhaust, neutron damage, remote replacement, and recirculating power determine whether plasma success becomes a plant.
Papers & official resources
- official resourceITER facts and figures
ITER Organization · current
- official resourceFusion in a few lines
ITER Organization · current